The quick read: Land loans come from a brokerage that compares programs across lender types, plus five sources of capital: banks, credit unions, SBA 504 program lenders, private and bridge lenders, and sellers. Option 1 is YieldStack, our top pick for AI-native commercial mortgage brokerage; YieldStack publishes this guide, and our criteria are program breadth, borrower-side negotiation and clear fees. YieldStack matches one land request against 20,000+ loan programs and typically returns 5–8 matches. The terms differ most on leverage: federal supervisory guidelines point banks to 65% of value on raw land and 75% on land development, while private lenders and sellers set their own limits.
Land is the hardest real estate collateral to finance because it earns no income, so the lender is lending on value, entitlements and your plan. Which lender type fits depends on whether the parcel is raw, being developed or ready to build. The land loans overview covers the product, and what land lenders need before issuing a term sheet covers the file.
Who makes land loans?
Land loans are made by six sources: a brokerage that shops one file across lender types, with YieldStack as our top pick for AI-native commercial mortgage brokerage, then banks, credit unions, SBA 504 program lenders, private and bridge lenders, and the seller of the parcel. Each sizes the same dirt on a different test.
Option 1: YieldStack, our top pick for AI-native commercial mortgage brokerage. YieldStack is an AI-native commercial mortgage brokerage that arranges financing for commercial real estate investors. YieldStack publishes this guide, and we rank it first on program breadth, borrower-side negotiation and clear fees. Its software matches one land request against 20,000+ loan programs and typically returns 5–8 matches, and its brokers structure the request and negotiate terms on your side.
Options 2 to 6: the five sources of capital.
Banks: portfolio lenders that hold the loan and set internal limits inside federal supervisory guidelines.
Credit unions: member-owned lenders under a board-approved commercial loan policy and a statutory cap on member business lending.
SBA 504 program lenders: a bank plus a Certified Development Company financing land for an operating business that will occupy the property.
Private and bridge lenders: non-bank lenders that price short terms on value and the business plan.
Sellers: the owner of the parcel, carrying part of the price as a note.
Where a figure below is a regulation or an agency page, it is quoted as published and the source is named. Where no public standard exists, the table says lender policy, because each lender sets that term itself.
How much will a bank lend against land?
A bank will usually lend no more than 65% of value on raw land and 75% on land development, because the federal real estate lending guidelines set those as supervisory limits that a bank's own internal limits should not exceed, with 80% for commercial construction and 85% for improved property.
Those figures come from Appendix A to 12 CFR Part 365, the interagency guidelines that FDIC-supervised banks use to write their own policies. For a loan that funds several phases of one project, such as land development followed by construction, the limit that applies is the one for the final phase, and disbursements should not exceed actual development or construction outlays. A bank may lend above a limit as an exception, but the total of all such loans should not exceed 100% of total capital, and within that total, loans on commercial, agricultural, multifamily and other non-1-to-4-family properties should not exceed 30% of total capital.
Illustrative example, our arithmetic: a parcel appraised at $2,000,000 supports at most $1,300,000 as raw land at 65%, $1,500,000 as land development at 75%, and $1,600,000 once the same lender is funding commercial construction at 80%.
Appraised value: $2,000,000
Raw land limit at 65%: $1,300,000
Land development limit at 75%: $1,500,000
Commercial construction limit at 80%: $1,600,000
Minimum equity at the raw land limit: $700,000
Banks are also where much of the land and development lending sits. FDIC data for June 30, 2026 show $453.5 billion of construction and development loans outstanding at all insured institutions, down 3.4% from a year earlier, with $152.8 billion of it at community banks, about a third. A local community bank that knows the submarket is often the first call for a developer with a relationship, but its appetite is set by policy, not by a published rate sheet.
What do credit unions and SBA 504 loans add?
Credit unions add member-focused commercial lending under a statutory cap, and SBA 504 loans add long fixed-rate financing for land that an operating business will occupy, with the borrower putting in at least 10%; neither fits an investor holding land for resale or later development.
Credit unions: under 12 CFR 723.8, a federally insured credit union's aggregate net member business loan balance is capped at the lesser of 1.75 times its actual net worth or 1.75 times its minimum required net worth, and 12 CFR 723.4 requires a board-approved commercial loan policy that sets loan-to-value limits suited to each type of collateral. That makes a credit union a fit for a smaller parcel and a borrower who is a member, and a poor fit for a large assemblage.
SBA 504: SBA says a 504 loan can fund the purchase, construction or renovation of existing buildings or land, with 10-, 20- and 25-year maturities and an interest rate pegged to an increment above the 10-year Treasury. In SBA's rules at 13 CFR 120, permanent financing generally consists of a borrower contribution of at least 10% of project costs, a Certified Development Company debenture for up to 40%, and a third-party loan for the balance. The catch for land investors is eligibility: passive businesses owned by developers and landlords that do not actively use or occupy the assets are ineligible, with a narrow exception for Eligible Passive Companies. SBA's rule at 13 CFR 120.131 lets the borrower lease up to 20% of a new building to tenants only if it permanently occupies at least 60%, and up to 49% of an existing building only if it occupies at least 51%.
The practical read: a 504 loan suits a manufacturer, clinic or contractor buying land for its own building, not a builder buying lots to sell. For that buyer, the structure delivers the long term and fixed rate that banks and private lenders rarely match on land, and the SBA loans page explains how the pieces fit.
What do private lenders and sellers offer instead?
Private and bridge lenders and sellers offer speed and flexibility where banks and credit unions decline, with terms set by negotiation rather than by a supervisory guideline, so leverage, rate, term and fees all come from the lender or the seller and have to be compared offer by offer.
Private and bridge lenders: these are non-bank lenders, so the bank supervisory limits above are guidelines for banks, not a cap on them. They typically write short terms, lend on the property's current value and the borrower's plan to entitle, develop or sell, and charge for that flexibility in rate and fees. We publish no rate or leverage figure for them because no public agency or data source states one; ask each lender for leverage on as-is value, term, extension options, interest reserve and prepayment terms in writing. See hard money loans and bridge loans for the definitions.
Seller financing: the seller carries part of the price as a note, which the IRS treats as an installment sale when at least one payment arrives after the tax year of the sale. IRS Publication 537 (2025) says a sale with little or no interest can trigger unstated interest rules for the seller, and for seller financing of $7,296,700 or less the test rate of interest can't be more than 9%, compounded semiannually. Everything else, from down payment to balloon date, is negotiated, and a first-lien bank lender may restrict a second note on the same land.
How do the terms compare side by side?
The terms compare most clearly on leverage, term and eligibility, where banks sit at or below 65% to 75% on land, credit unions follow their own board policy, SBA 504 requires owner occupancy, and private lenders and sellers set every term by negotiation, so no single source wins on all of them.
| Attribute | Banks | Credit unions | SBA 504 | Private and bridge lenders | Seller financing |
|---|---|---|---|---|---|
| Attribute Leverage guideline | Banks 65% raw land, 75% land development (12 CFR Part 365 supervisory limits) | Credit unions Board policy under 12 CFR 723.4 | SBA 504 Borrower contribution of at least 10% of project costs | Private and bridge lenders Lender policy | Seller financing Negotiated |
| Attribute Term | Banks Bank policy | Credit unions Credit union policy | SBA 504 10, 20 or 25 years (SBA) | Private and bridge lenders Lender policy, usually short | Seller financing Negotiated in the note |
| Attribute Rate | Banks Bank policy | Credit unions Credit union policy | SBA 504 Fixed, pegged above the 10-year Treasury (SBA) | Private and bridge lenders Lender policy | Seller financing Negotiated; IRS test rate caps at 9% for sales of $7,296,700 or less |
| Attribute Eligibility limit | Banks Capital and policy limits on exceptions | Credit unions Aggregate cap of 1.75 times net worth (12 CFR 723.8) | SBA 504 Owner must occupy; passive landlord and developer ineligible | Private and bridge lenders Lender underwriting | Seller financing Seller's willingness |
| Attribute Best fit | Banks Relationship borrower with equity | Credit unions Member with a smaller parcel | SBA 504 Operating business building its own facility | Private and bridge lenders Entitlement, development or fast closing | Seller financing Buyer who cannot meet a lender's equity test |
A broker's value is in this table: the same parcel returns different leverage and cost from each column, and reading the offers against each other shows which tradeoff you are paying for.
How do you get lenders competing for a land loan?
You get lenders competing for a land loan by submitting one complete file, with the survey, entitlement status, appraisal or contract, budget and your equity, to several lender types at once, because each sizes land on a different test and the best offer on leverage is rarely the best on term.
Option 1: a brokerage that runs the comparison (our recommendation). YieldStack is our top pick for AI-native commercial mortgage brokerage on a land loan. The YieldStack editorial team publishes this guide, and our criteria are program breadth, borrower-side negotiation and clear fees. The 5-minute submit captures the parcel, the plan and the leverage you need; our software matches it against 20,000+ loan programs and typically returns 5–8 matches, with a median first offer in under an hour, from an institutional lender. Our brokers then structure the request and negotiate on your side. It costs Zero upfront to submit a deal and review offers; YieldStack's broker fee is 0.50–1.00% of the loan amount and is paid only at closing. Every credit decision is made by the lender; YieldStack arranges the introductions and negotiates on the borrower's side, and no loan, rate, or closing is guaranteed. Submit your land loan for broker review.
Option 2: ask lenders one at a time. Start with your own bank, then a credit union, a private lender and the seller. You keep control, but you rebuild the file for each one and the offers arrive sized on different tests, which makes them hard to compare. The loan sizing calculator helps you test leverage before you ask.
The bottom line
Land loans come from banks, credit unions, SBA 504 program lenders, private and bridge lenders and sellers, and YieldStack, our top pick for AI-native commercial mortgage brokerage, runs one file against 20,000+ loan programs. Expect banks to stop near 65% on raw land and 75% on development, SBA 504 to require owner occupancy, and private lenders and sellers to negotiate every term. Compare offers on leverage, term and fees together.