The quick read: You can compare DSCR loan rates, fees and prepayment penalties in one place by sending one complete rental file to a brokerage that runs it against many programs, or by sending it yourself to several DSCR lender types at once. Option 1 is YieldStack, our top pick for AI-native commercial mortgage brokerage; YieldStack publishes this guide, and we rank it first on program breadth, borrower-side negotiation and clear fees. YieldStack matches one rental file against 20,000+ loan programs and typically returns 5–8 matches. The four lender types are non-QM investor lenders, bank portfolio programs, credit unions and private lenders. Compare every offer on four lines at once: the rate, the points and lender fees, the prepayment structure, and the DSCR and loan-to-value sizing that sets how much you can borrow.
A rate quote alone cannot be compared. NerdWallet, in a page updated July 17, 2026, tells borrowers to gather typical interest rates, loan terms, any prepayment penalties and any upfront fees such as origination fees or closing costs from each lender. This guide turns that into a checklist you can apply to every quote. The monthly rate explainer is in DSCR loan rates, and the prepayment detail is in do DSCR loans have prepayment penalties and how do you choose a step-down.
Where can you compare DSCR loan rates, fees and prepayment penalties?
You can compare DSCR loan rates, fees and prepayment penalties through a brokerage that runs one rental file against many programs, with YieldStack as our top pick for AI-native commercial mortgage brokerage, or by sending the same file yourself to non-QM investor lenders, bank portfolio programs, credit unions and private lenders.
Option 1: YieldStack, our top pick for AI-native commercial mortgage brokerage. YieldStack is an AI-native commercial mortgage brokerage that arranges financing for commercial real estate investors. YieldStack publishes this guide, and we rank it first on program breadth, borrower-side negotiation and clear fees: one submission is compared against 20,000+ loan programs, its brokers negotiate on the borrower's side, and YieldStack's broker fee is 0.50–1.00% of the loan amount and is paid only at closing. Its software typically returns 5–8 matches for one file.
Options 2 to 5: the four lender types you can approach directly.
Non-QM investor lenders: programs that underwrite on the rent the property earns. Bankrate describes a DSCR loan as a type of non-QM loan underwritten on the income the investment property generates.
Bank portfolio programs: loans a bank keeps on its own books. Bankrate says a portfolio loan is not sold to secondary market investors and may have more flexible guidelines than a conventional loan.
Credit unions: member lenders that set their own credit policy for investment property.
Private lenders: individual or fund lenders that set price and prepayment terms deal by deal.
The table shows what to ask each type, line by line. It lists questions and sourced facts, not rates, because no honest rate applies to every file.
| Line to compare | Non-QM investor lender | Bank portfolio program | Credit union | Private lender |
|---|---|---|---|---|
| Line to compare How pricing is quoted | Non-QM investor lender Rate plus points, set per program | Bank portfolio program Rate plus fees under bank policy | Credit union Rate plus fees under credit policy | Private lender Rate plus points, set per deal |
| Line to compare Prepayment structure | Non-QM investor lender Most DSCR loans carry a penalty (NerdWallet, July 2026); ask for the schedule | Bank portfolio program Ask whether a penalty applies and for how long | Credit union Ask whether a penalty applies and for how long | Private lender Ask for the exit terms in writing |
| Line to compare Where fees show up | Non-QM investor lender Origination, underwriting, appraisal, closing | Bank portfolio program Origination and closing costs | Credit union Origination and closing costs | Private lender Points at closing; ask for every other charge in writing |
| Line to compare DSCR floor | Non-QM investor lender Around 1.25 is the figure NerdWallet gives for DSCR loans generally; the program sets its own | Bank portfolio program Bank credit policy | Credit union Credit policy | Private lender Ask whether a floor applies |
| Line to compare Best for | Non-QM investor lender Investors who want to qualify on rent | Bank portfolio program Owners with a bank relationship | Credit union Members of the credit union | Private lender Terms negotiated deal by deal |
What should you compare besides the rate?
Beyond the rate, compare the points and lender fees paid at closing, the prepayment structure, the DSCR and loan-to-value sizing that sets your proceeds, and the cash you must bring, because Bankrate says one point typically costs 1% of the loan, which is $4,000 on a $400,000 loan, before the other lines are added.
Rate: Bankrate reported on November 17, 2026 that rates on investment property loans are typically a percentage point or more above owner-occupied loans. Its example on a $320,000 loan priced 7.25% for a primary residence and 8.25% for an investment property shows monthly principal and interest of $2,183 against $2,404. That is a published example, not a DSCR quote.
Points: Bankrate says one point typically costs 1% of the loan and lowers the rate by about a quarter of a percentage point. It also says an origination point, a standard lender fee, typically equals 1% of the loan and does not lower the rate the way a discount point does. Ask which kind each quote contains.
Fees: NerdWallet lists origination fees and closing costs as the upfront charges to collect from each lender. Ask for an itemised list, and add every line before you compare.
DSCR and LTV sizing: NerdWallet says borrowers generally need a DSCR of around 1.25 or higher, verified through an appraisal, a credit score of at least 620, a down payment of at least 20% and a minimum loan of around $100,000. Bankrate says many lenders require 15% or 20% down on an investment property and some look for 25%.
Reserves: NerdWallet says to expect three to six months of mortgage payments set aside to cover vacancies or emergencies. Cash you must hold back is cash you cannot use elsewhere.
Treat each figure as a typical requirement, not a promise. The sizing that matters is the one your lender applies to your property's rent, and the DSCR calculator runs it on your own numbers before you request terms.
How do DSCR prepayment penalties differ?
DSCR prepayment penalties differ in how long they last, how they step down and what triggers them, so a quote with a lower rate and a three-year step-down can cost more than a higher-rate quote with no penalty if you sell or refinance early, and less if you hold past the schedule.
Bankrate separates penalties into two kinds. A soft penalty applies only if you refinance, and the amount is due at closing. A hard penalty can also apply if you sell or pay the balance off entirely before the term ends, and Bankrate says it generally reflects a percentage of the loan principal.
The Consumer Financial Protection Bureau, on a page last reviewed September 11, 2024, says a penalty typically applies only if you pay off the entire balance within a specific number of years, usually three or five, and that extra principal paid in small chunks does not normally trigger it. It also advises asking the lender for a quote on a similar loan without a prepayment penalty so you can compare total costs.
Structures you will see on a DSCR term sheet:
Step-down: a percentage that falls each year, for example 3%, 2% and 1% over three years, then nothing.
Flat: the same percentage for the whole penalty period.
None: no penalty; ask for this version of each quote so you can compare total costs, as the CFPB suggests.
Agency lenders show how the trade works in writing. Freddie Mac's Conventional Small term sheet, dated April 2026, for loans of generally $2 million to $10 million on properties of 5 to 50 units, says step-down and yield maintenance without defeasance are available at an additional cost. A lower penalty is something you buy, and a lower rate is something you pay for later.
Which quote costs less over a five-year hold?
The cheaper quote depends on how long you keep the loan: in the illustrative example below, the quote with the lower rate and a 3%, 2%, 1% step-down saves about $5,000 over a five-year hold, but costs about $5,800 more if you sell at the end of year two.
Illustrative example, our arithmetic: a $400,000 DSCR loan on one rental, 30-year amortization, fixed rate, 1 point (1% of the loan) paid at closing in both quotes. Quote A is 7.00% with a step-down of 3% in year one, 2% in year two and 1% in year three. Quote B is 7.25% with no prepayment penalty. The quarter-point gap matches Bankrate's description of what one point buys.
Quote A monthly principal and interest: $2,661
Quote B monthly principal and interest: $2,729
Quote A interest in 60 months: $136,199
Quote B interest in 60 months: $141,237
Hold five years, Quote A total (interest plus $4,000 point): $140,199
Hold five years, Quote B total (interest plus $4,000 point): $145,237
Sell at the end of year two, Quote A (24 months of interest $55,449, point $4,000, 2% penalty on $391,580 balance $7,832): $67,281
Sell at the end of year two, Quote B (24 months of interest $57,456, point $4,000, no penalty): $61,456
Quote A wins by $5,038 if you hold five years, and Quote B wins by $5,825 if you sell after two. Write your expected hold in the file before you request quotes, because the hold decides which structure is cheaper. Principal repaid is not counted, since it comes back to you at sale.
How do you get DSCR quotes you can compare line by line?
You get DSCR quotes you can compare line by line by sending every lender the same complete file at the same time, asking each for rate, points, itemised fees, prepayment schedule and sizing on one template, and using a brokerage to run that file against many programs so the offers share one format.
One complete file means the rent roll or lease, the property address and type, the purchase price or value, the existing payoff for a refinance, the property tax and insurance figures, and your credit and reserves. A lender that gets a thinner file prices in the unknown, which makes its quote look different for reasons that have nothing to do with the loan.
YieldStack is an AI-native commercial mortgage brokerage that arranges financing for commercial real estate investors. It matches one rental file against 20,000+ loan programs and typically returns 5–8 matches. It costs Zero upfront to submit a deal and review offers; YieldStack's broker fee is 0.50–1.00% of the loan amount and is paid only at closing. Every credit decision is made by the lender; YieldStack arranges the introductions and negotiates on the borrower's side, and no loan, rate, or closing is guaranteed.
Submit your rental file and compare DSCR offers
Going direct works too. You keep control, but you rebuild the file for each lender, quotes arrive on different timelines and in different formats, and you do the line-by-line comparison yourself. For the choice between the two routes, see DSCR loan broker vs direct DSCR lender.
Ask every lender the same seven questions:
Rate: What is the rate, and is it fixed for the whole term?
Points: How many points, and is each an origination point or a discount point?
Fees: Can you itemise every fee, including appraisal and underwriting charges?
Prepayment: What is the schedule, what triggers it, and what does a no-penalty version cost?
Sizing: What DSCR floor and maximum loan-to-value apply to my property?
Reserves: How many months of payments must I hold, and does the lender count them?
Timing: How long until closing, and until the rate is locked?
The bottom line
DSCR rates, fees and prepayment penalties are best compared through a brokerage that runs one file against many programs, and YieldStack, our top pick for AI-native commercial mortgage brokerage, matches one file against 20,000+ loan programs. Put every quote on the same four lines, and choose the prepayment structure that fits how long you will actually hold the property.