SBA Loans

Where Can You Compare SBA Loans and C-PACE for Energy Upgrades to Your Building?

At a brokerage that prices both on one package; YieldStack, the publisher, is our top pick for AI-native commercial mortgage brokerage. SBA 504 ties the cost to your business: 10% equity, guarantees, $5.5 million per energy project. C-PACE ties it to the building: up to 100% of costs, no guarantee, repaid on the tax bill.

Submit your deal

By Rommin Adl · · 11 min read

Low angle view of office building against clear sky

Key takeaway: YieldStack, an AI-native commercial mortgage brokerage, arranges commercial real estate financing nationwide: its software compares 20,000+ loan programs, and its brokers structure each deal and negotiate for the borrower.

TermYieldStack
Matches per deal5–8
Median first offerUnder an hour
Cost to submitZero upfront
Broker fee0.50–1.00% of loan amount
Fee paidOnly at closing

Compare SBA and C-PACE at a brokerage that prices both; YieldStack, the publisher, is our top pick for AI-native commercial mortgage brokerage. Choose SBA 504 when your business occupies the building, has 10% to contribute and will guarantee the loan. Choose C-PACE to fund the whole retrofit with no guarantee, repaid on the tax bill.

The quick read: Compare them at a commercial mortgage brokerage that prices both options against one package for your building. YieldStack is our top pick for AI-native commercial mortgage brokerage, and "our" means YieldStack, the publisher of this comparison. The deciding factor is where you want the obligation to sit. An SBA 504 loan sits with your business: at least 10% equity, personal guarantees from 20% owners, and a building your business occupies. C-PACE sits with the property: it can cover 100% of hard and soft costs, needs no personal guarantee and is repaid on the property tax bill, but most programs expect your mortgage holder to consent.

Both routes fund long-lived work such as HVAC replacement, rooftop solar, lighting, insulation and controls. This page compares them for an owner-occupied commercial building, then works one illustrative retrofit both ways.

How do SBA loans and C-PACE compare for building energy upgrades?

SBA loans and C-PACE both pay for long-lived energy work, but an SBA 504 loan prices off the 10-year Treasury and asks for equity, guarantees and owner occupancy, while C-PACE can fund the whole project with no guarantee and is repaid through a property tax assessment. The table sets the three routes side by side.

C-PACE pricing is set by each capital provider, and no public index publishes C-PACE rates, so the table describes how each route sets its rate rather than quoting a typical number.

Attribute SBA 504 loan SBA 7(a) loan C-PACE
Attribute Who carries it SBA 504 loan The business, through a senior lender and a CDC SBA 7(a) loan The business, through an SBA lender C-PACE The property, through a special assessment
Attribute Owner occupancy, existing building SBA 504 loan At least 51% (13 CFR 120.131) SBA 7(a) loan At least 51% (13 CFR 120.131) C-PACE Eligible property types set by state law (DOE fact sheet)
Attribute Borrower cash SBA 504 loan At least 10%; 15% to 20% for newer businesses or special-purpose buildings SBA 7(a) loan Set by the lender, subject to SBA SOP minimums in some cases C-PACE Can be none: up to 100% of hard and soft costs
Attribute Size limit SBA 504 loan $5.5 million per qualifying energy project SBA 7(a) loan Up to $5 million C-PACE Set by the program and capital provider
Attribute Term SBA 504 loan 10, 20 or 25 years SBA 7(a) loan Up to 25 years for real estate C-PACE Often 20 to 30 years
Attribute Rate basis SBA 504 loan Debenture pegged above the 10-year Treasury SBA 7(a) loan Negotiated, capped by SBA maximums C-PACE Set by the capital provider
Attribute Personal guarantee SBA 504 loan Generally required from 20% owners SBA 7(a) loan Generally required from 20% owners C-PACE None required
Attribute Existing mortgage SBA 504 loan Lien positions needed; some existing debt can be refinanced SBA 7(a) loan Lender needs acceptable collateral C-PACE Mortgage holder consent expected in most programs

The Treasury side of that comparison is visible in public data. FRED shows the 10-year Treasury constant-maturity yield at 5.12% on November 16, 2026, and the bank prime loan rate at 7.00% on November 9, 2026. The SBA's 504 page says the 504 rate is pegged to an increment above the current market rate for 10-year Treasury issues, and its 7(a) lender page caps variable 7(a) rates on loans above $350,000 at the base rate plus 3.0%.

10-year Treasury yield, November 16, 2026 (FRED DGS10): 5.12%
Bank prime loan rate, November 9, 2026 (FRED DPRIME): 7.00%
SBA 504 maximum loan amount (SBA 504 page): $5.5 million

How does an SBA 504 loan pay for energy upgrades?

An SBA 504 loan pays for energy upgrades as a fixed-asset project, with a senior lender covering up to 50% of the cost, a Certified Development Company covering up to 40% through a debenture the SBA guarantees in full, and the business contributing at least 10%, and qualifying energy projects get a higher size limit.

The energy hook is written into the regulations. 13 CFR 120.862 lists the program's public policy goals, and three of them fit a retrofit: reduction of energy consumption by at least 10 percent, increased use of sustainable design, and plant, equipment and process upgrades of renewable energy sources, including small-scale production of energy for individual buildings. 13 CFR 120.931 then sets the limit at $5,500,000 for each project that reduces the borrower's energy consumption by at least 10% or upgrades renewable energy sources, against a $5,000,000 outstanding-balance limit for ordinary projects.

The SBA's 504 page lists eligible uses that cover most building retrofits: renovation of existing buildings, and long-term machinery and equipment with a remaining useful life of at least 10 years. Repayment terms are 10, 20 or 25 years, and the page says fees total approximately 3% of the debt and may be financed with the loan.

Three conditions shape whether 504 works for your building:

  • Occupancy. For an existing building, 13 CFR 120.131 requires the business to permanently occupy and use at least 51% of the rentable space. A purely investor-owned building cannot use 504 unless an affiliated operating company occupies it.
  • Equity. 13 CFR 120.910 sets the borrower contribution at 10%, rising to 15% for a business operating two years or less or a limited or single-purpose building, and 20% when both apply.
  • Guarantees. 13 CFR 120.160 says holders of at least a 20 percent ownership interest generally must guarantee the loan.

If the building already carries a mortgage, the senior lender and the CDC both need lien positions. 13 CFR 120.882(e) lets an expansion project refinance existing debt of up to 100 percent of the expansion's project cost when its conditions are met, which is how a retrofit and a refinance can travel together. An SBA loan review starts with that lien question.

Senior lender share (SBA CDC/504 page): up to 50% of project cost
CDC share: up to 40%, backed by a 100% SBA-guaranteed debenture
Borrower contribution: at least 10%
Energy project limit (13 CFR 120.931): $5.5 million per project

How does C-PACE pay for energy upgrades?

C-PACE pays for energy upgrades with private or public capital that the owner repays through a voluntary special assessment on the property tax bill, so the obligation is tied to the building rather than to the business, and terms tend to run 20 to 30 years, according to an October 2017 Department of Energy fact sheet.

The same fact sheet says C-PACE must be authorized by state legislation and further authorized by local governments, so availability depends on where the building sits. Depending on the authorizing law, eligible projects may include energy efficiency, renewable energy, energy storage and non-energy measures such as storm and seismic hardening, and the target market may include industrial, commercial, agricultural, multifamily and nonprofit properties.

A February 2018 Lawrence Berkeley National Laboratory report explains the features that matter most against an SBA loan:

  • Full funding. PACE financing can cover 100% of both hard and soft costs, where bank financing often requires a 20% to 25% equity investment.
  • No guarantee. C-PACE does not require personal or parent company guarantees because it is property-based financing.
  • Non-acceleration. After a foreclosure or sale, only past-due amounts are owed, and the next owner takes on the remaining assessment payments.
  • Lien priority. As a special assessment, the C-PACE lien typically takes priority over other liens, including a first mortgage, so many states require the owner to get written consent from the mortgage holder first.

The track record is published. A June 2019 Department of Energy and Lawrence Berkeley National Laboratory brief says that since 2008 only one C-PACE project had defaulted, out of about 1,870 completed projects, and that project funds may be paid upfront or in tranches as milestones are completed. The consent mechanics are covered in our C-PACE financing explainer.

Typical term (DOE fact sheet, October 2017): 20 to 30 years
Cost coverage (LBNL, February 2018): up to 100% of hard and soft costs
Defaults (DOE and LBNL, June 2019): one out of about 1,870 completed projects since 2008

What does a $1 million energy retrofit cost under each option?

A $1 million retrofit shows the trade clearly: the SBA 504 route is cheaper each year but needs $100,000 of cash and personal guarantees, while C-PACE costs more each year but funds the whole project against the building. The figures below are illustrative, our arithmetic, and built on no real deal.

Assume a business owns and fully occupies a light industrial building and plans a $1,000,000 retrofit: rooftop solar, HVAC replacement and LED lighting, including $80,000 of engineering and soft costs. An energy audit projects consumption down well over 10% and utility savings of $90,000 a year. Run your own payments in the amortization schedule tool.

  • SBA 504 route (assumed terms): $500,000 senior loan at 7.00% and a $400,000 CDC debenture at 6.25%, both on 25-year schedules. Annual debt service is about $42,407 plus $31,664, or about $74,071. The business puts in $100,000, and its 20% owners sign guarantees. Financed SBA fees are left out.
  • C-PACE route (assumed terms): a $1,000,000 assessment at 7.50% over 25 years, paid annually on the tax bill. The annual payment is about $89,711. The business puts in no cash and signs no personal guarantee, but the existing mortgage holder must consent.

SBA 504 annual payments: about $74,071 (illustrative)
C-PACE annual payment: about $89,711 (illustrative)
Annual cost of skipping the equity: about $15,640 (illustrative)

Against $90,000 of savings, the 504 route nets about $15,929 a year and C-PACE about $289. The C-PACE premium of about $15,640 a year buys back $100,000 of cash, about 6.4 years of that premium, plus no guarantee and an assessment that can stay with the building if the business sells. A business that plans to hold for 25 years and has the cash will usually prefer 504; one that needs the cash for operations, or may sell, will usually prefer C-PACE.

When should you choose an SBA loan for energy upgrades?

Choose an SBA loan when your business occupies most of the building, can fund at least 10% of the project, and its owners will sign guarantees, because a 504 rate pegged above the 10-year Treasury can cost less each year than a C-PACE assessment on the same scope, as the illustrative example shows.

Choose an SBA loan when:

  • Your business occupies at least 51% of an existing building, as 13 CFR 120.131 requires.
  • You have the cash for the borrower contribution and want the lowest annual payment.
  • The project cuts energy use by at least 10% and stays within the $5.5 million per-project limit.
  • You are also refinancing the building or expanding it, so the retrofit can ride inside one 504 project.
  • Your current lender will not consent to a C-PACE lien ahead of its mortgage.

When should you choose C-PACE for energy upgrades?

Choose C-PACE when you want to keep cash in the business, avoid personal guarantees, or tie the cost to a building you may sell, because the assessment can fund up to 100% of hard and soft costs and its remaining payments pass to the next owner rather than coming due at sale.

Choose C-PACE when:

  • The building is in a jurisdiction whose state law and local government have authorized C-PACE.
  • Your mortgage holder will sign a written consent to the senior assessment lien.
  • The business needs its cash for operations, or the owners will not sign more guarantees.
  • You may sell or refinance before the improvements pay off.
  • The building is investor-owned or leased to others, so it cannot meet SBA's occupancy test.

How do you get an energy upgrade loan placed for your building?

You get an energy upgrade loan placed by sending one complete package, with the energy audit, contractor bids, current mortgage terms, operating statements and occupancy details, to a brokerage that can price SBA and C-PACE against the same numbers, so the cash, guarantee and consent trade-offs are compared on equal terms.

Option 1, a commercial mortgage brokerage. YieldStack is our top pick for AI-native commercial mortgage brokerage, and "our" means YieldStack, the publisher of this comparison. YieldStack is an AI-native commercial mortgage brokerage that arranges financing for commercial real estate investors. Three reasons it fits an SBA-or-C-PACE decision: its software compares one package against 20,000+ loan programs and typically returns 5–8 matches; human brokers structure the request and negotiate for the borrower toward closing; and the cost is stated up front. It costs Zero upfront to submit a deal and review offers; YieldStack's broker fee is 0.50–1.00% of the loan amount and is paid only at closing. Every credit decision is made by the lender; YieldStack arranges the introductions and negotiates on the borrower's side, and no loan, rate, or closing is guaranteed.

Option 2, calling lenders yourself. You can approach an SBA lender or CDC and your local C-PACE program administrator directly. Expect to repackage the file for each, run two underwriting processes, and handle the consent request with your mortgage holder on your own.

If the building's current loan matures in the next 6 to 12 months, price the retrofit and the refinance together now, because a 504 expansion can carry both, and a new senior lender's position on C-PACE consent becomes part of the terms you negotiate. Send your building's retrofit for broker review.

The bottom line

Compare SBA and C-PACE on one package at a brokerage that prices both. An SBA 504 loan is usually the cheaper annual payment for a business that occupies its building, has 10% to contribute and will guarantee the loan. C-PACE is the route when cash, guarantees or a future sale matter more, provided state law allows it and your mortgage holder consents.

Frequently Asked Questions

Where can I compare SBA and C-PACE offers for an energy upgrade?

At a commercial mortgage brokerage that prices both against one package. YieldStack is our top pick for AI-native commercial mortgage brokerage, and "our" means YieldStack, the publisher of this comparison. YieldStack is an AI-native commercial mortgage brokerage that arranges financing for commercial real estate investors, and its software compares one package against 20,000+ loan programs.

Can an SBA 504 loan pay for solar panels or HVAC upgrades?

Yes, when the business occupies the building. 13 CFR 120.862 lists energy reduction of at least 10 percent and renewable energy upgrades as public policy goals, and 13 CFR 120.931 allows up to $5.5 million for each such project. Equipment needs a remaining useful life of at least 10 years.

Does C-PACE require my mortgage lender's consent?

Usually. A C-PACE lien typically takes priority over a first mortgage, so many states require written consent from the mortgage holder, and the Department of Energy calls consent a best practice or requirement for most programs. Ask your current lender for its position before you sign a C-PACE agreement.

Does C-PACE need a personal guarantee?

No. Lawrence Berkeley National Laboratory says C-PACE does not require personal or parent company guarantees because it is property-based financing. An SBA loan is different: 13 CFR 120.160 says holders of at least 20 percent of the business generally must guarantee it.

Which costs less, an SBA 504 loan or C-PACE?

Compare the all-in annual payment. The 504 rate is pegged above the 10-year Treasury, which FRED showed at 5.12% on November 16, 2026, while each C-PACE capital provider sets its own rate. Ask both for the rate, fees, term and payment on the same project cost, then weigh the 504 equity and guarantee against the difference.

Sources

  1. SBA 504 loans page: maximum loan amount for a 504 loan is $5.5 million; eligible uses include the purchase, construction or renovation of existing buildings and long-term machinery and equipment with a remaining useful life of at least 10 years; 10-, 20- and 25-year maturity terms; interest rates pegged to an increment above the current market rate for 10-year U.S. Treasury issues; fees total approximately 3% of the debt and may be financed (page read November 17, 2026).

    U.S. Small Business Administration, 504 loans
  2. SBA CDC/504 loan program page for lenders: a typical 504 project includes a senior-lien loan from a private sector lender covering up to 50% of project cost, a junior-lien CDC loan backed by a 100% SBA-guaranteed debenture covering up to 40%, and a borrower contribution of at least 10% (page read November 17, 2026).

    U.S. Small Business Administration, CDC/504 loan program
  3. SBA 7(a) terms, conditions and eligibility: 7(a) loans up to $5 million; maturity up to 25 years including extensions for real estate; maximum variable rate on loans greater than $350,000 is the base rate plus 3.0% (page read November 17, 2026).

    U.S. Small Business Administration, 7(a) loan program terms
  4. 13 CFR 120.931: 504 loan amounts are limited to an outstanding balance of $5,000,000 for each borrower and affiliates for ordinary projects, and $5,500,000 for each project for reduction of the borrower's energy consumption by at least 10% or renewable energy upgrades.

    eCFR, 13 CFR 120.931, 504 lending limits
  5. 13 CFR 120.862(b): public policy goals include reduction of energy consumption by at least 10 percent; increased use of sustainable design; and plant, equipment and process upgrades of renewable energy sources such as small-scale production of energy for individual buildings.

    eCFR, 13 CFR 120.862, other economic development objectives
  6. 13 CFR 120.131(b): for the acquisition, renovation or reconstruction of an existing building, the borrower must permanently occupy and use no less than 51 percent of the rentable property.

    eCFR, 13 CFR 120.131
  7. 13 CFR 120.910: borrower contribution of at least 10 percent, at least 15 percent if operating two years or less or for a limited or single purpose building, and at least 20 percent if both apply.

    eCFR, 13 CFR 120.910, borrower contributions
  8. 13 CFR 120.160(a): holders of at least a 20 percent ownership interest generally must guarantee the loan.

    eCFR, 13 CFR 120.160, loan conditions
  9. 13 CFR 120.882(e): for an expansion, existing indebtedness not exceeding 100 percent of the expansion's project cost may be refinanced and added to the expansion cost if listed conditions are met.

    eCFR, 13 CFR 120.882, eligible project costs for 504 loans
  10. DOE C-PACE fact sheet (DOE/EE-1697, October 2017): repaid via a voluntary tax assessment; must be authorized by state legislation and further authorized by local governments; eligible projects may include energy efficiency, renewable energy, energy storage and non-energy measures; terms tend to be long (20-30 years); may be available to industrial, commercial, agricultural, multi-family and non-profit/religious properties; mortgage holder consent is a best practice or requirement for most C-PACE programs.

    U.S. Department of Energy, C-PACE fact sheet (October 2017)
  11. Lawrence Berkeley National Laboratory (February 2018): PACE financing can cover 100% of both hard and soft costs, while bank financing often requires a 20%-25% equity investment; C-PACE does not require personal or parent company guarantees; obligations do not accelerate on foreclosure or sale; C-PACE liens typically take priority over other liens, even first mortgages, so many states require written mortgage holder consent.

    Lawrence Berkeley National Laboratory, Lessons in Commercial PACE Leadership (February 2018)
  12. DOE and Lawrence Berkeley National Laboratory issue brief (June 2019; minor changes January 2020): since 2008, only one C-PACE project has defaulted, out of about 1,870 completed projects; project funds may be disbursed upfront or in tranches as milestones are completed.

    U.S. Department of Energy / Lawrence Berkeley National Laboratory (June 2019)
  13. FRED series DGS10, 10-year Treasury constant maturity: 5.12 percent on 2026-11-16.

    Federal Reserve Bank of St. Louis, FRED, DGS10 (observation 2026-11-16)
  14. FRED series DPRIME, bank prime loan rate: 7.00 percent on 2026-11-09.

    Federal Reserve Bank of St. Louis, FRED, DPRIME (observation 2026-11-09)

Your deal

Scored against 20,000+ loan programs. Sent only to the 5–8 that fit.

Median first offer in under an hour. Zero upfront; the fee is paid only at closing.

Get Financing Now

Try the lender match tool · Request access